Guided Surgical Kit
The core function of the half-guided surgical kit is to assist in placing the implant accurately to the planned subcrestal depth, after which the guide is removed so that the final restoration can obtain stable retention.
- Controls primary stability
Guides the implant to be placed at the planned angle and depth, helping achieve good primary stability, which is the foundation for immediate restoration.
- Enables minimally invasive precision
No flap is required. Through a small mucosal access opening, the guide sleeve controls the drilling direction and helps reduce surgical trauma.
- Supports immediate restoration
Because the guide is removed after implant placement, the abutment and temporary crown can be installed directly, allowing same-day tooth restoration.
- Protects soft and hard tissues
Reduces the risk of damage to adjacent teeth and important anatomical structures during freehand operation, while also minimizing compression of the gingival tissue.
Drill Guider | Product Code | Specification |
| 110.2025 | Ø2.0/2.5mm | |
| 110.2830 | Ø2.8/3.0mm | |
| 110.3335 | Ø3.3/3.5mm | |
| 110.3843 | Ø3.8/4.3mm |
Fix Pin |
Product Code | Specification |
| 110.1015 | Ø1.5*20 |
Pilot Drill |
Product Code | Specification |
| 110.0015 | Ø1.5*20 |
Positioning Drill |
Product Code | Specification |
| 110.1020 | Ø2.0*5 |
Tissue Punch |
Product Code | Specification |
| 108.0738 | Ø3.8mm | |
| 108.0743 | Ø4.3mm | |
| 108.0750 | Ø5.0mm |
Pilot Drill |
Product Code | Specification |
| 110.1320 | Ø2.0*25 |
Pilot Drill |
Product Code | Specification |
| 110.1220 | Ø2.0*21 |
Pilot Drill |
Product Code | Specification |
| 110.1120 | Ø2.0*17 |
Twist Drill |
Product Code | Specification |
| 110.1325 | Ø2.5mm | |
| 110.1328 | Ø2.8mm | |
| 110.1330 | Ø3.0mm | |
| 110.1333 | Ø3.3mm | |
| 110.1335 | Ø3.5mm | |
| 110.1338 | Ø3.8mm | |
| 110.1343 | Ø4.3mm |
Twist Drill |
Product Code | Specification |
| 110.1225 | Ø2.5mm | |
| 110.1228 | Ø2.8mm | |
| 110.1230 | Ø3.0mm | |
| 110.1233 | Ø3.3mm | |
| 110.1235 | Ø3.5mm | |
| 110.1238 | Ø3.8mm | |
| 110.1243 | Ø4.3mm |
Twist Drill |
Product Code | Specification |
| 110.1125 | Ø2.5mm | |
| 110.1128 | Ø2.8mm | |
| 110.1130 | Ø3.0mm | |
| 110.1133 | Ø3.3mm | |
| 110.1135 | Ø3.5mm | |
| 110.1138 | Ø3.8mm | |
| 110.1143 | Ø4.3mm |








